Keywords:
Bidding extended on Open items for 4 minutes since last bid.
Category: TOOLS (57 records) Rollin' Down The Road ~ AUCTION ENDED -
Previous page Next page

Item Photo Description Bids High
Bidder
Current
Amount
Next Bid
Required
Your
Bid
Your
Maximum
43
T43-1.jpg
16 feet. Length of chain with hooks on both ends.
S


5 2482 12.50  
ended
45
T45-1.jpg
Pair of Automotive Pullers. 


9 1395 17.50  
ended
46
T46-1.jpg
Tool lot.
Saw squares and a level (level missing a bubble).
S


       
ended
47
T47-1.jpg
Lot of 6 Hammers.
S


3 1175 7.00  
ended
48
T48-1.jpg
Miscellaneous Lot of Tools.
Screwdrivers, Saw Blades, Flaring, Tools, Wrenches, etc.
S


3 1642 8.00  
ended
49
T49-1.jpg
4 Tape Measures, a couple of cutters, and a whole lot of  
x-acto knife blades.
S


3 1243 7.00  
ended
57
T57-1.jpg
3 - Multimeter's.
Large one is a Micronta and the other two are GB.
One of the GB's is a digital meter.
Comes with a bunch of leads, not sure which goes with which.


       
ended
58
T58-1.jpg
Pair of vintage Craftsman corner clamp or Miter vise.
In original boxes.
S


2 5251 6.00  
ended
59
T59-1.jpg
Ridgid No 3 Pipe Cutter.
Cuts pipe from 1 - 3 inch in diameter.
S


2 6010 40.00  
ended
60
T60-1.jpg
Waxmaster Random Orbital Waxer/Polisher.
In case with manual and applicator sleeves.
S


2 6074 17.50  
ended
65
T65-1.jpg
Milwaukee Corded Electric Heavy-Duty Impact Wrench,1/2 inch drive with impact sockets and carrying case.
Works.
QS


9 1355 37.50  
ended
73
T73-1.jpg
Tool Shop Belt Sander with Extra Belt.
Works.
S


2 1175 6.00  
ended
74
T74-1.jpg
Milwaukee four-inch Angle Grinder,could use a new cord,
and Black & Decker 3/8 corded drill both work.
S


3 2383 8.00  
ended
75
T75-1.jpg
Dirt Devil,
and Dustbuster Corded hand vac’s both work.
S


       
ended
76
T76-1.jpg
Sears Craftsman 1/4 HP Saber Saw Variable Speed Works.
S


4 6012 12.50  
ended
77
T77-1.jpg
Arrow Electric Stapler works.
Uses T 50 staples 1/4-1/2 inch.
S


1 6087 5.00  
ended
78
T78-1.jpg
Skilsaw Classic 7 1/4 inch,
2 1/3 HP handsaw works.
S


7 6030 12.50  
ended
81
T81-1.jpg
Older Floor Jack.
Works.
Needs oil on front wheels and raising/lowering wheel.
S


5 1243 10.00  
ended
82
T82-1.jpg
Ex-Cell 1000 pound Engine Stand.
S


2 6020 25.00  
ended
84
T84-1.jpg
Antique Breast or Shoulder Brace Drill.
Works well. Could not find a makers mark.
S


2 6010 6.00  
ended
139
T139-1.jpg
Preformax Vacuum 16 gallon, 6 horse.
Plugged in and works.


4 1626 22.50  
ended
219
T219-1.jpg
Little Giant Multi-Purpose Pump.
1/3 horsepower.
B


4 1230 17.50  
ended
220
T220-1.jpg
Three fluorescent trouble lights
12 to 24 inches long all work. S


1 6020 5.00  
ended
221
T221-1.jpg
Automotive Parts Washer.
Pump sounds like it runs smoothly but not enough fluid to pump and see if it works 30x21x31 high, model P20,probably holds 20 gallons of fluid. S


3 6053 25.00  
ended
222
T222-1.jpg
Three chain tighteners
two are 5400 pounds capacity, and one is small light duty S


4 1941 10.00  
ended
223
T223-1.jpg
Auto body work tools
including Campbell Hausfeld air file and two air palm sanders 1 works unable to test other, see photos. S


4 1528 8.00  
ended
224
T224-1.jpg
Pair of air operated tools including
Campbell Hausfeld 5 inch Grinder and an
Air hammer with tools. Both work. S


2 6053 6.00  
ended
225
T225-1.jpg
M P 1/2 inch air operated impact wrench
Works, a little sluggish (like Andy) needs oil (like Andy) and to be used (fill in the blanks ____ ____) S


       
ended
226
T226-1.jpg
HDC 1/2 inch drive Air Ratchet,
and an Eagle Industries air operated Cut Off Tool both work. S


4 6053 9.00  
ended
227
T227-1.jpg
Machinist vice and some chisels and punches. S


1 2482 5.00  
ended
229
T229-1.jpg
Schumacher Dual Rate Battery Charger 
 6/2 amp, 6 or 12 V works. Also including a four amp Traveller battery charger only works on 12 VS


3 6030 7.00  
ended
230
T230-1.jpg
Craftsman 1/3 HP bench grinder
Works, includes dark goggles, face shield, some buffing pads and compound see photos. S


2 1244 10.00  
ended
231
T231-1.jpg
Two Squirrel Cage Exhaust or Furnace Fans
both work one is 10 x 10 and the other is 13 x 13. S


5 2383 12.50  
ended
232
T232-1.jpg
Atlas Drill Press
Working bench mounted drill press. 
36" tall and height adjustable. You will need to bring a socket set to unbolt from bench. S


5 6033 42.50  
ended
234
T234-1.jpg
Miscellaneous vintage workshop items including,
2 wood planes, Craftsman drill grinding attachment, sharpening stone, number stamps, 2 working bottle jacks and a Putter Kutter.
S


2 1395 7.00  
ended
235
T235-1.jpg
Miscellaneous drill bits including masonry, wood, metal, and some holes saws.
S


2 1244 7.00  
ended
236
T236-1.jpg
Three antique wood and steel pulleys
S


8 6010 25.00  
ended
237
T237-1.jpg
Two air hoses, and a heavy duty extension cord,
did not measure, approximately 50 to 75 feet long.
S


2 1230 6.00  
ended
238
T238-1.jpg
2 mauls, a pick, a hatchet etc.,
see photos.
S


3 1175 8.00  
ended
239
T239-1.jpg
Wards Power-Kraft 230 Continuous Amperage Control Arc Welder,
turns on and hums, did not test.
18 x23 x12.
S


2 1243 6.00  
ended

Bidder number Password Increments

Select page to view:
p1


© Copyright, 2019 AuctionGrooVe.com